Troubleshooting
Power, Charging, & Button Issues
The fan will not turn on, or the UI buttons are not working.
First, press the Power button to ensure the fan has been turned on. If it still does not respond, check the battery level.
1. If the Battery LED indicator blinks red, the battery needs to be charged. Connect the provided charger.
2. If all the LEDs are flashing, the fan is in Lock Mode. This safety feature deactivates all functions for maintenance or travel. To turn off Lock Mode, press and hold the Power button for 8 seconds until the lights show the normal Power On pattern.
The battery light is flashing red when I try to activate BreezeBoost™ or Misting mode.
This indicates that the battery level is too low to support these high-power functions. To resolve this, charge the fan using the provided charger. Once the battery has sufficient charge, you will be able to use all modes.
The second fan speed LED and the Battery LED (in amber) are flashing.
This error state indicates a problem with the charging voltage. Ensure you are only using the original Shark™ charging cable and power supply that was provided with your fan. Using a third-party charger can cause this issue.
Misting System Issues
The fan is not misting effectively or at all.
There are a few common reasons for the misting function to not work properly.
1. Check Misting Cap: Ensure the misting cap, located in the centre of the fan grill, is fully opened.
2. Check Water Tank: Verify there is water in the tank. The fan will not mist with an empty tank.
3. Clean the Misting System: The system may be clogged, especially if you have hard water. A "Clean Soak" is recommended weekly or as needed. To do this, activate Lock Mode, fill the tank with 150ml of undiluted distilled white vinegar, and let it sit for 5-7 minutes. Afterward, carefully empty the vinegar and thoroughly rinse the tank twice with clean water before use.
4. Check Battery Level: The misting feature cannot be activated if the battery level is too low. This will be indicated by flashing misting and battery lights. Charge the fan to use the misting feature.
The misting feature shut off by itself.
This is a built-in safety feature to prevent damage. The misting function will automatically shut off after 1 hour in Consistent mode or 2 hours in Interval mode to prevent the system from running dry. If you refill the water tank while the fan is in use, the timer may also turn off the misting function. To reactivate it, simply press the Misting icon on the fan head.
General Operation
Can I leave or use the fan outdoors?
Yes, the fan is designed to be rain-resistant and can withstand light rain. However, it is not suitable for heavy rain or water submersion. IMPORTANT: Do NOT charge the fan or use it while it is raining. For long-term storage or if inclement weather is predicted, bring the fan indoors.





